Analog input function selector

NAVIGATION: Inputs/outputs > Analog inputs > Analog input function selector

Analog input function selector

The reference processing method is selected by way of the function selector. The default setting is the function RERV(-2), with which the reference input +/-10 V is evaluated referred to user units.

The parameters are initialized only after the control has been re-enabled or by a device restart.

The selection TLIM(-4) to REFV(-2) is reserved for the analog input function. The other settings can be used for the function as a digital input.

Bild: Analog input function selector (-5) to (-1)

Settings for the analog input

P. no.	Parameter name Setting	Function
P 0109/ P 0110	MPRO_INPUT_FS_ISA00/ISA01	Reference selector for the analog inputs
(-5)	Not defined	Not defined
(-4)	TLIM(-4)	Torque scaling: 0 to 10 V corresponds to 0-100% of the maximum set torque. The backlash is not effective for these functions.
(-3)	OVR(-3)	Scaling of the parameterized travel speed in positioning (0 to 10 V corresponds to 0 – 100%). The override is recorded directly after the analog filter. The backlash is not effective for these functions!
(-2)	REFV(-2)	Reference input +/-10 V referred to user units.

Tabelle: Reference selector